Detailed Instructions for the Installation and Removal of Screen Protecters are as follows:

Step No.1
clean the screen surface thoroughly,
ensuring that there are no dust & dirt
particles or fingerprints that may cause bubbles.

Step No.2
remove a portion of the protective mask
labeled step 1. and carefully align the clinging surface
with the edge of the screen

Step No.3
slowly peel off the rest of the mask and
allow the protector to cling to the
screen, while gently pressing out the air
at the same time

Step No.4
remove the final protective mask labeled
step 2. once removed you will see a beautiful glass-
like finish which will look identical to the
original screen

Step No.5
protectors can be easily removed using
the following methods:
a. using a piece of strong adhesive to
lift one of the corners.

Step No.6
b. by sliding a thin piece of plastic
polymer between the screen protector and the device
(remember that there is only an air
vacuum and no adhesive, thus there
always a micro gap between the pet and
the surface).